Description
Preparation
Ensure all surfaces are clean, dry and free from any previous finish.
Remove any fungal growth, dirt or moss on old timber prior to application.
Sand the substrate with an 80 grade sanding paper or 80 grade sanding disk
removing all traces of dust.
Application
Apply in dry conditions.
Always test on a small area prior to initial application to check colour shade.
First Coat
Stir contents thoroughly, before and during use.
Apply consistently using a Fiddes Floor brush or 10mm microfibre roller and lay
evenly, following the direction of the grain. Leave to dry for 6-12 hours.
Second & Third Coats
Sand lightly if necessary and apply as per first coat.
Longer drying periods may occur during application in cold, damp or humid
conditions.
Coverage
A single application will cover approximately 10-20 sqm per litre depending on
density of substrate
Re-application
Annual re-application is recommended. In areas of high weather exposure reapplication
may be required more frequently.
Tints: Clear, Natural Oak, Chestnut, Harvest Brown