Quantum Power Clean

  • Brand: Quantum
  • Product Code:

$60.50 inc GST

POWER CLEAN oil and sealer remover is ideal for removing oil treatments, sealers and weathered oil based finishes from external timber surfaces. Apply undiluted POWER CLEAN to a wet surface using a garden spray, brush or roller (no thinning is required).

Adequate preparation of exterior timber surfaces prior to coating will greatly enhance the longevity of the coating and ensure less maintenance is required in the future. For best results it is important to choose the right timber deck cleaner. This will prevent early adhesion failure and drying issues due to contamination from tannins and extractives naturally found in the timber.


Removes old and weathered oil based finishes, stains, treatments and sealers from timber.
 Removes weathered oil based finishes, stains, treatments and sealers in as little as 10 minutes.
 Apply on any exterior timber surface.
Typical Applications
All external timber surfaces.
 Approx. 10m² per litre.
Application Method
By hose, brush or roller.
Good preparation is key to a professional looking, long lasting finish:
1. Wet surrounding areas and plants before starting.
2. Apply undiluted POWER CLEAN to wet surface using a garden spray, brush or roller. (No thinning
3. Allow POWER CLEAN to remain wet on the surface for approximately 10 minutes. (Do not let the product
dry on the surface).
4. Using a stiff bristle broom, scrub the surface to see if the coating has lifted.
5. Use a strong jet of water or pressure wash to rinse the surface of the timber. Repeat if necessary.
6. Follow with DEX PREP to neutralise the timber and rid the surface of any darkening which may occur in
the cleaning process.
Failure to thoroughly remove the cleaning solution may result in timber discolouration under clear finishes.

MSDS Downloads

File Name Link
Data Sheet Download
SDS Download

You may also like…